19
© Vallox • We reserve the right to make changes without prior notice
USING THE UNIT
VENTILATION PROFILES
VIEWING THE AWAY PROFILE INFORMATION
If you want to view the Away profile settings, proceed as follows:
1. Open the
Away
profile main view.
2. Press the
Profile information
button.
3. The first information screen for the profile appears.
This screen contains the following information:
•
Supply air
— This value indicates the temperature of the air
blown indoors and its set value (in parentheses), if the supply
air is warmer than the set value.
•
Outside air
— This value indicates the outside air
temperature.
•
Fan speed
— This value indicates the fan speed. If the
ventilation unit has an automatic fan speed boost on, the
set value is shown in parentheses, and then the actual fan
speed.
•
Cell status
— Cell status indicates the status of the ventilation
device heat exchanger cell. Possible statuses are:
•
Heat recovery
— The heat recovery cell heats the air
streaming in from outdoors.
•
Cooling
— The heat recovery cell cools the air streaming
in from outdoors.
•
Cell bypass
— The inflowing air by-passes the heat
recovery cell.
•
Defrosting
— The heat recovery cell is being defrosted.
4. Press the
Right arrow
button.
5. The second information screen for the profile appears.
This screen contains the following information:
•
Humidity
— This value indicates the maximum measured
humidity value that the system has read from the sensors.
•
Carbon dioxide
— This value indicates the maximum
measured carbon dioxide value that the system has read
from the sensors.
•
Change filters
— This value indicates the next
recommended filter change date.
•
Used days
— This value indicates how long the device has
been running.
