24
© Vallox • We reserve the right to make changes without prior notice
VENTILATION PROFILES
USING THE UNIT
MODIFYING THE FIREPLACE FUNCTION
SETTINGS
When you want to edit the Fireplace function settings, proceed as
follows:
1. Open the
Fireplace function
main view.
2. Press the
Profile information
button.
3. Press the
Edit
button.
4. The fan speed setup screen is opened.
5. Use the
Plus
and
Minus
buttons to set the
Fireplace function
duration in minutes. This value determines how long the profile
is enabled when you switch it on.
6. Press the
Right arrow
button.
7. The screen for setting the profile supply air fan speed
appears.
8. Set the
Fireplace function
supply air fan speed as a
percentage of the maximum by using the
Plus
and
Minus
buttons.
TIP
In the fireplace mode, we recommend that you increase the
supply air fan speed, in order to obtain a positive pressure at the
ventilation zone. We do not recommend reducing the extract air
fan speed.
9. Press the Right arrow button.
10. The screen for setting the profile extract air fan speed will
appear.
11. Set the
Fireplace function
extract air fan speed as a
percentage of the maximum by using the
Plus
and
Minus
buttons.
12. Press the
Right arrow
button.
13. The profile timer setting screen is displayed.
14. Use the
Plus
and
Minus
buttons to select whether the profile
timer function is enabled or not. The options are:
•
On
— When the timer is enabled, the
Fireplace function
is only on for the period defined in the timer.
•
Off
— When the timer is disabled, the
Fireplace function
is used until you (or the week clock) change the profile.
15. Press the
OK
button.
