28
© Vallox • We reserve the right to make changes without prior notice
SETTINGS
USING THE UNIT
FILTER SETTINGS
When you want to browse through the filter settings, proceed as
follows:
1. Select
Settings > Filter
.
2. Press the
OK
button.
3. The filter status summary screen is opened.
4. This screen contains the following information:
•
Filters changed
— This value indicates the date when the
filter was last replaced.
•
Next reminder
— This value indicates the date when a
reminder for replacing the filter will be shown next.
•
Reminder interval
— This value indicates the filter replace
interval in months.
SETTING THE FILTER REPLACED DATE
This section describes how to enter information in the MyVallox
Control control panel on replacing the Vallox ventilation unit filter.
Replacing the filter itself is described in the Vallox ventilation unit
maintenance instructions.
When you want to set the date when you replaced the Vallox
ventilation unit filter, proceed as follows:
1. Select
Settings > Filter
.
2. Press the
OK
button.
3. The filter status summary screen is opened.
4. Press the
Edit
button.
5. The
Filter status
1/2 screen is opened.
6. Press the
Plus
button. The
Filters changed
field value
changes to
Today.
7. Press the
OK
button.
