7
© Vallox • We reserve the right to make changes without prior notice
INTRODUCTION
The ventilation specialist has made the ventilation system basic
settings, based on the ventilation plan. The basic settings are:
• User interface language.
• Time and date.
• System administrator password. The installer has given you the
system administrator password.
• Possible parental controls.
• Fan settings.
• User profile settings, such as the temperature.
If you are satisfied with the basic settings made by the installer, do
not make changes to them.
STARTING THE UNIT
If you are starting the ventilation unit for the first time, or after
any maintenance procedure, connect the plug to the outlet,
starting the unit. When the unit starts up, the diagnostic display will
appear for a few seconds, until the At home profile main screen is
opened.
If the unit is switched off from the control panel, you can start the
ventilation unit by pressing any button on the control panel.
NOTE
The first launch of the unit may take a while, as the control panel
will format its software and verify that it has the latest software
version.
SWITCHING THE UNIT OFF
If you want to switch off the ventilation unit, proceed as follows:
1. Select
Settings
> Turn unit OFF.
2. Press the
OK
button.
3. The system asks for confirmation.
4. Press the
OK
button.
5. The ventilation unit is now switched off.
INTRODUCTION
