Page 41
8-7-11
Stand the IBT transfer component upright with the
handle facing downward.
8-7-12
While replace the whole component, take a new one and 1.
remove the screws; 2. remove the tension plate. For belt
replacement, skip this step.
8-7-13
When replacing the whole component, 1. install the
tension plate; 2. fasten the screw. For belt replacement,
skip this step.
8-7-14
1. Remove the screw; 2. Remove the tension plate.
8-7-15
1. install the tension plate; 2. fasten the screw.
8-7-16
1. Remove the screw; 2. Remove the support plate.
