Release 08/21
High-Containment Roadside Safety Barrier
18
HIGHWAY
Ezy-Guard HC Installation Checklist
Customer:
Project:
Barrier ID:
Barrier Length:
Checked By:
Signed:
Date
Have the Z-posts been positioned every 2m
Yes
No
Carriages are positioned on the posts between the retaining lugs and the resistance tabs
Yes
No
Posts are installed to the correct height (970mm) and within the tolerances of section 7.13
Yes
No
Have the Ezy-HC-Carriages been correctly orientated
Yes
No
Have the rails been attached to the Ezy-HC-Carriages using the appropriate carriage bolt
Yes
No
Have the rails been spliced observing the correct lap
Yes
No
Have the rails been spliced with M16x32mm mushroom head bolts
Yes
No
Are all splice bolts and post bolts snug tight
Yes
No
Is the Ezy-Guard HC attached to suitable transition rails then anchored with approved terminals
Yes
No
Are the cables in the terminals tensioned to their nominated torque (taut)
Yes
No
Has any minor damage been repaired using two coats of an organic zinc rich paint
Yes
No
Does the barrier form a smooth line vertically and horizontally when viewed along the system
Yes
No
Is the barrier system free from humps, sags or other irregularities
Yes
No
Has the ground or pavement around the post been left dense, tight and smooth
Yes
No
Are the barrier components free from splits, burrs or sharp edges after installation
Yes
No
Disclaimer:
Important Note: The conformity of the installation is the responsibility of the installation contractor, and Valmont Highway accepts no liability for or in connection
with any installation that is outside of the specifications of this manual or the Road Controlling Authority. For more information, please refer to our Standard
Terms and Conditions of Sale available on our website: www.ingalcivil.com.au.
Summary of Contents for Ezy-Guard HC
Page 20: ...Release 08 21 20 HIGHWAY...
Page 21: ...Release 08 21 21 HIGHWAY...
Page 23: ...Release 08 21 23 HIGHWAY...
Page 24: ...Release 08 21 24 HIGHWAY...
