valmont INGAL MashFlex MASH TL3, Product Manual

24

Release 07/22

3000

1100

75 MIN COVER

1000

F8 MESH - TOP FACE ONLY

75 MIN COVER

 









 



800





450

NOTES

1. CONCRETE TO HAVE MINIMUM 28 DAY STRENGTH OF 30 MPa.

2. MINIMUM CLEAR COVER TO BE 75 mm.

3. THE AVERAGE MATERIAL-INTERNAL ANGLE OF FRICTION OVER THE DEPTH OF THE ANCHOR WHEN MEASURED USING AN

APPROVED METHODOLOGY SHALL EXCEED THE FOLLOWING:

 

 = 30 DEGREES



Y = 19 kN/m³



Cu = 35 kPa

4.FOR SITES WITH UNCONVENTIONAL GEOMETRIES, HIGH WATER TABLES, ALTERNATIVE SOIL TYPES, OR UNUSUAL SITE SPECIFIC

VARIABLE, AN ALTERNATIVE ANCHOR DESIGNS WILL BE REQUIRED.  PLEASE SEEK ADVICE FROM A QUALIFIED GEOTECHNICAL

ENGINEER OR YOUR LOCAL INGAL SALES REPRESENTATIVE. 

5. FOR MIXED SOIL TYPES, A CONSERVATIVE APPROACH OF ASSUMING THE WEAKER SOIL PROPERTIES FOR THE FULL DEPTH IS

RECOMMENDED. OTHERWISE, CONTACT A QUALIFIED GEOTECHNICAL ENGINEER.

6. FOR ADDITIONAL GUIDANCE, PLEASE CONTACT YOUR LOCAL INGAL SALES REPRESENTATIVE.

7. ALL UNITS ARE IN MM UNLESS NOTED OTHERWISE.

8. INGAL CIVIL PRODUCTS MARKET THIS SYSTEM UNDER THE TRADE NAME SAFENCE IN NEW ZEALAND.

9. SAFETY CHECK ROPES ARE ONLY REQUIRED ON THE STANDARD TERMINAL, NOT THE TL3 TERMINAL.

APPROVED

DRAWN

SCALE

Rev:

NAME

DATE

CHECKED

@

ISSUE FOR

INFORMATION ONLY

C I V I L   P R O D U C T S

COMPANY

valmont

A

FLEXFENCE / MASHFLEX WRSB

RECTANGULAR (TYPE 3) ANCHOR BLOCK

WR-STD-64

7

N.T.S.

A3

02-11-2011

AUSTEC

TC

02-11-2011

TC

02-11-2011

F:\ENGINEERING\SALES & MARKETING\DRAWINGS\FLEXFENCE ASSEMBLY\WR-STD-64 - TYPE 3 ANCHOR BLOCK.DWG

1

12-02-2010

INITIAL ISSUE

MS

TC

TC

2

02-11-2011

TITLE BLOCK UPDATED

DJB

TC

TC

3

26-10-2012

NOTE 1 UPDATED (32MPa WAS 25MPa)

DK

4

06-08-2016

NOTE ADDITIONS

MC

LG

LG

5

05-10-2016

NOTE 9 ADDED

MC

LG

LG

6

29-10-2019

TITLE BLOCK UPDATED

VB

LG

LG

7

01-09-2020

DIMENSION FIXED

VB

LG

LG