![background image](http://html2.mh-extra.com/html/valor/1100in/1100in_danger-a-barrier-designed-to-reduce-the-risk-of-burns-from-the-hot-viewing-glass-is-provided-with-th_3277483028.webp)
28
40”
38”
40”
*
*
Between underside of header and
base of heater. Base of heater must
be at
finished hearth height
.
Increase cavity height accordingly.
29” between
underside of
non-combustible
board and base
of heater
1/2” thick non-combustible
board required above engine
(not supplied). See page .
Any surface directly in front of
the unit which is at a height of
less than 4” from the bottom of
the unit
must be non-combustible
.
- Rear Vent: 16-1/2“
- Top Vent: 17-1/2”
- May be reduced
by thickness of
additional
non-combustible
wall finish applied
on top of 1/2”
non-combustible
board when using
trims other than the
1130 Fixed Frame
FRAMING DIMENSIONS 1100 and 1150
NOTE: This unit requires a
solid platform to support it.
Combustible framing allowed
beneath fireplace. Please note
that any shims used
underneath to raise the
heater should be set back
1/2” behind front face of
framing otherwise top face
of shims may be visible.
Framing Requirements
29
QUALIFIED
INSTALLER