40
WARNING
CHOKING HAZARD!
Ensure that the
fi
replace
area is clear of vermiculite particles as these could
be ingested by small children. Vacuum area after
installation.
6. Some vermiculite may be added outside the burner
on the platform if desired.
7. Place the rocks on the platform as shown below.
You can also place one or two rocks on the
vermiculite as shown.
Long Beach Driftwood Kit installed
Install Decorative Glass Murano
1510DGM
Material required
• Steel platform (supplied with appliance)
• Small container to distribute
fi
reglass (not included)
• Murano Glass Fire Kit, which contains:
◊
1 bag of blue azura
fi
reglass
◊
1 bag of black
fi
reglass
◊
1 glass platform
Installation
Carefully unpack the kit.
1. Install the steel platform around the burner as
indicated. The openings in the platform should
be underneath. The edge of the burner protrudes
above the platform. Push the platform as far back as
possible to maximize the air gap behind the burner.
IMPORTANT:
Approved for use only with the
fi
reglass
provided with your Valor
fi
replace or the tempered
crushed
fi
reglass brands
American Fireglass
™ or
fi regear
. The use of any other
fi
reglass products may
void your
fi
replace warranty.
!
Installation
Installed platform
Gap behind burner
No gap in front of burner
Top view—platform
QUALIFIED
INSTALLER
Summary of Contents for 1500INO (NG)
Page 56: ......