61
Appendix B—Remote Control Operation
Child Proof
Your handset can be set to lock out all commands to the
ȴ
replace, except OFF.
To turn Child Proof ON:
1. Press and hold + simultaneously.
2.
is displayed. Child Proof is now active.
To turn Child Proof OFF:
1. Press and hold + simultaneously.
2.
disappears. Child Proof is now inactive, and the
handset has full function.
Countdown Timer
You can set your
ȴ
replace to automatically turn o
at
the end of a timer.
To set a Countdown Timer:
1. Press and hold until is displayed.
Hour
ȵ
ashes.
2. Press or to select Hour.
3. To con
ȴ
rm, press .
Minutes
ȵ
ash.
4. Press or to select Minutes.
5. To con
ȴ
rm, press or wait.
To turn off a Countdown Timer:
1. Press , and the countdown disappears.
Note:
The Countdown Timer only works in Manual,
Thermostatic, and Eco modes. Maximum countdown
time is 9 hours and 50 minutes.
Light/Dimmer Operation
On:
Press , is displayed. Light is on at
preset level.
Off:
Press , disappears. Light turns o
.
Setting:
1. Press and hold until
ȵ
ashes.
2. To adjust light between 20-100% press or .
3. To con
ȴ
rm setting either press or wait.
is displayed.
Note:
The light works independently of the pilot
ȵ
ame.
If you want the light on but no
ȵ
ame, press button.
Circulating Fan Operation
Setting:
1. Press and hold until
ȵ
ashes.
2. Press to increase or to de-
crease fan speed.
3. To con
ȴ
rm setting, either press
or wait. is displayed.
Off:
Press until all 4 speed level bars disappear.
Note:
When setting, if the fan was not switched o
after last use, it starts automatically 4 minutes after
ignition at maximum speed, and goes to the last set
level after 10 seconds. The fan stops 10 minutes after
the gas is OFF or at pilot.
AM
(not available)
(not available)
