5.4.6
Install the front log.
Be careful not to break the pegs
projecting from the log.
The front edge of the log should rest behind the
vertical metal edge of the firebox base which is
behind the front base bricks and front burner tube.
Be aware that there should be a gap between the
right side of the front log and the right side base
brick. There should be no gap at the left side (fig
16).
5.4.7
Install the left cross log (fig. 17).
The underside of the log is marked “L” (for left) and
“F” (for front).
Place the cross log so that the left side peg
projecting from the front log is inserted into the hole
in the cross log and with the rear of the cross log
resting in the channel in the rear log.
Be careful not
to break the peg projecting from the log.
Fig. 17 Left cross log location
Fig. 16 Front log location
14
