Packing Contents:
1 Wall Bracket A
2 Screws B
1 Screw C
2 Wall Anchor D
1 Spacer E
(detach before assembly)
1 Wall Bracket F
Switch Plate
Alternative 1
Alternative 2
Alternative 3
Remote Control Handset Wall Holder Installation
Side Shrouds Installation
The remote control kit for this fireplace
comes complete with a wall-mounted holder.
This holder is not required in all installations
but is provided as an optional feature for
those customers who wish to mount the
remote handset to the wall.
To install the holder to the wall, find a
convenient location and use the hardware
provided with the kit. See the diagram below
for required hardware and configurations.
Note that the holder can be installed at the
base of a light switch plate.
IMPORTANT
. The location of the remote
control handset is important to assure
proper temperature regulation. To obtain a constant
temperature, we recommend that the handset should
be between 3 and 15 feet away from the appliance
but not directly above it
. We also advise that the
handset should be located away from any other heat
source and not in direct sunlight as this may affect the
temperature sensor located in the remote handset.
The side shrouds are required to install the front on
the appliance. They are supplied with the engine.
Fit them to the appliance outer case as indicated
(2 screws/side).
Door hinge tabs
should face
inwards
21
