4
Installation of the barrier screen
1. Hold the screen on the sides and locate the top into
the channel inside the top section of the surround.
2. Grab the finger tabs on the bottom of the frame and
lower the screen straight down locating the bottom
hooks into slots hidden just behind surround plate.
3. Verify that the screen is properly hooked to the trim
and secure.
Removing the screen
The barrier screen will need to be removed to access the
fireplace controls or for maintenance.
To remove the screen, hold both finger tabs and lift and
tilt the bottom towards you, lower screen to clear the
surround and away from the fireplace.
Maintenance
To clean the fireplace trim, use mild soap and water.
To clean the barrier screen, dust with a soft brush.
If the barrier becomes damaged, the barrier shall
be replaced with the manufacturer’s barrier for this
appliance.
To clean the window and ceramics inside the firebox,
see the
Homeowner’s Manual
supplied with the fireplace.
WARNING
DO NOT TOUCH THE BARRIER SCREEN OR
FIREPLACE WHILE THEY ARE HOT! Let the
fireplace cool first before cleaning it.
FOR SAFETY PURPOSE, ensure the barrier
screen is re-installed on the fireplace front
after maintenance if it has been removed.
Finger tab
Front tab
