16
Cleaning your fireplace
WARNING
The window units must be correctly
installed, fastened and sealed after
servicing. If not it could result in serious
bodily injury and/or damage to the
fi
replace.
To ensure safe operation:
• Double-check that the bottom of each
window frame is correctly installed in
the bottom support railing;
• Verify that the retainer hooks are
properly fastened to the top angle
brackets;
• Pull out the top of each side window and
release it to ensure the springs return it;
• Ensure the window is sealed before
operation.
WARNING
Failure to install the window correctly
can:
• Cause carbon monoxide to leak.
• Affect the performance of the fireplace.
• Damage components.
• Cause overheating resulting in
dangerous conditions.
Damage caused by incorrect window
installation is not covered by the Valor
Warranty.
WARNING
For safety purposes, make sure the
barrier screen is re-installed on the
fi
replace front after maintenance.
6. Pull one retainer hook over the angled rail at the
top of the window, and hook it down completely.
Repeat on the other side. Ensure the hooks latch
completely to the rail.
7. Press
fi
rmly around the edge of the window with
your hands, particularly at the top and on each
side. The silicone gaskets must seal the window
from top to bottom.
8. Repeat steps 1 to 7 for the other side window.
9. Replace the hot glass warning plate against one of
the side windows, in the bottom rail.
10. Replace barrier screens on
fi
replace.
Correct
Incorrect
