3
3
3
3
Figure 1
Siting
Your Valor stove is designed to be free
standing on a level surface but when siting
it please bear the following points in mind.
T
Never use the stove anywhere where
water is in use, i.e. bathrooms, shower
rooms etc.
T
If you are placing it in an alcove, make
sure that the side clearances are at
least as shown in figure 1.
T
Although your stove complies with all
the safety standards some types of floor
coverings (e.g. vinyl tiles, synthetic deep pile
carpets) may be affected by the hot air from the fan. If
this could apply to your floor covering, we suggest that
you place the stove on a shallow plinth which projects
approximately 20cm forward of the front feet (See figure 1).
T
Keep loose hearthrugs etc. away from the front of the stove. They could obstruct
the free flow of hot air from the fan.
T
Do not locate the stove immediately under a fixed electrical socket. The socket must always be
accessible so that the stove can be easily disconnected.
T
Do not route the mains supply cable under carpet etc.
