26
Optional Cast Iron Fret Installation
Drop fret with
bolt into slotted
bracket (fret
adjusts up or
down to suit)
Fret Brackets Installation
1. Screw 2 thumbscrews into each retainer tab.
2. Fit the retainer tabs to each leg (1 screw per side).
3. Fit the slotted holes in the fret brackets over the
thumbscrews, push fret brackets downwards and
tighten the screws.
Slip fret brackets
over thumbscrews
and tighten screws
Fit thumscrews
to retainer tab
Fit retainer tab
to leg
Optional Bottom Cover Installation
Hook the upper
ange of the bottom cover onto the
window bolts.
Hook the top
flange of the
bottom cover
to the window
retaining pins
Top
Front
Rear
Top flange
Bottom flange
(bends here)
Bottom
(end plates longer
than front plate)
Rear View
Side View
Top
Bottom
DO NOT use
this hole
Cast Iron Fret Installation
1. Adjust the screw heads on the back of fret to the
thickness of the fret bracket.
2. Drop the fret into place while guiding the screw
heads into the slots in the bracket.
3. Clip the ash pan cover onto the fret.
QUALIFIED
INSTALLER
Summary of Contents for Retrofire RF24XBN
Page 30: ......