4000829/05
1
SF10BL/12BR
STONEFIRE INNER FRAME KIT
INSTALLATION INSTRUCTIONS
CSA approved for use
only
with
Valor Model 530 Heater and a StoneFire mantel
1.
GENERAL
The ‘Kit’ consists of a set of black sheet metal panels used to extend the perimeter size of the engine to
accommodate StoneFire mantels, with the addition of an inner cast iron removable frame.
Kit contents
FOR ENGINE CONFIGURATIONS AND VENTING,
REFER TO MAIN INSTALLATION BOOKLET SUPPLIED WITH ENGINE
FOR MANTEL INSTALLATION,
REFER TO INSTALLATION BOOKLET SUPPLIED WITH MANTEL KIT
Kit content
TM
Note:
This kit must be installed or serviced by a qualified installer, service agency or the gas supplier. These
instructions are to be used in conjunction with the main installation instructions for the above listed model.
WARNING: If the information in these instructions is not followed exactly, a fire or explosion may
result causing property damage, personal injury or loss of life.
Complete assembly: Mantel, fireplace, frame kit
