6
The figure above shows “3B” tyre is over-inflated and ”3A” tyre is under-inflated. The
display just shows axle3 until the problems are corrected.
1.7 Leakage Warning
If over 0.33 Bar / 4.78PSI pressure loss in 16 seconds:
①
Display shows the pressure of
axle with abnormal tyre;
②
Warning sound “Di-Di”;
③
Leakage icon “ ” appears;
④
The
digits of abnormal tyre position twinkle.
The figure above shows “2C” tyre is leaking and “1A” tyre is over-hot. The display just
shows axle1 and axle2 automatically and circularly until the problems are corrected.
1.8 High Temperature Warning
When temperature inside tyre is higher than 80
℃
(176
℉
):
①
Display shows the
temperature of axle with abnormal tyre;
②
Warning sound “Di-Di”;
③
Abnormality icon “ ”
appears;
④
The digits of abnormal tyre position twinkle.
The figure above shows “1A” tyre is over-hot. The display just shows axle1 until the
problem is corrected.
1.9 Change ID Module Position
Thanks to our unique ID module technology, when you change wheel position later on, you
don’t need any learn or relearn / register tool. Just change corresponding ID modules’
position and restart the display and trailer ID box. Take 18-wheel vehicle for example.
