Service and Installation Manual
For warranty service, call 1-888-VALPRO8 / 1-813-502-030
2
ICE MAKER SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your
appliance. Always read and obey all safety messages.
This is the Safety Alert Symbol. This symbol alerts you to
potential hazards that can injure or kill you and others. All
safety messages will follow the Safety Alert Symbol and
either the words “DANGER”, “WARNING” OR
“CAUTION”.
DANGER means that failure to heed
this safety statement may result in
death or severe personal injury.
WARNING means that failure to
heed this safety statement may result
in extensive product damage, serious
personal injury, or death.
CAUTION means that failure to heed
this safety statement may result in
minor or moderate personal injury, or
property or equipment damage.
All safety messages will alert you to what the potential hazard is, tell you how
to reduce the chance of injury, and let you know what can happen if the
instructions are not followed.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of fire, electric shock or injury, when using
your ice maker, follow these basic precautions:
•
Plug into grounded 3-prong outlet
•
Do not remove grounding prong
•
Do not use an adapter
•
Do not use an extension cord
•
Disconnect power before cleaning
•
Disconnect power before servicing
•
Replace all panels before operating
•
Use 2 or more people to move and install ice maker
SAVE THESE INSTRUCTIONS
Service and Installation Manual
27
For warranty service, call 1-888-VALPRO8 / 1-813-502-030
Problem
Possible Cause
Probable Correction
Cubes are
partially
formed--are
white at the
bottom.
Not enough water in the
water bin.
Check if the water supply pressure
is below 20psig.
Check water supply--filter may be
restricted.
Check for a water leak at the water
tank.
The icemaker
stops
suddenly
while making
ice.
The electricity is off.
Reconnected the power supply line.
The room temperature
is out the state range.
Cut off the electricity; let the ice
maker stop working till the
temperature returns within the
stated range.
The body of
the ice maker
is electrified
The earth line isn't in
the socket.
Please use the socket meeting the
standard.
Scales occur
frequently
inside the
machine.
The hardness of the
water quality is too
high.
Using a water-soften apparatus
installed in front of the water inlet.
The ice cubes
are not
completely
formed when
being
dumped.
The sprinkler is
blocked.
Clean the sprinkler, see "interior
cleaning"
Summary of Contents for VPIM-420
Page 2: ......
