VAL
S
TEAM
ADCA
Produced in accordance with Sound Engineering Practices of the European PED - Pressure Equipment Directive.
IMI P130.08 E 00.20
10
If the product falls within category SEP it must not be CE marked, unless
other directives are applicable.
NOTE
This product is not in the scope of the ATEX 2014/34/EU directive as it does not have its
own potential ignition source. Personnel responsible for the plant installation must assess
the risks caused by static electricity and take the necessary precautionary measures to
prevent static charge. These measures include e.g. connection of the product to the
equipotential bonding system.
The product has been designed in accordance with ASME BPE and EHEDG guidelines.
The product surface finishing conditions and non-metallic material approvals such as
FDA and USP CL. VI are detailed in the ADCAPure specific inspection certificate.
Refer to IS PV20.00 Technical Information Sheet - ADCAPure for further information.
2.3. Product identification
The following items are indicated on the product nameplate or directly on its body:
• Manufacturer
• Product model (e.g. P130L)
• Pressure rating (e.g. PN16) or maximum allowable pressure (e.g. Pmax = 16 bar)
• Nominal size (e.g. TC 1/2’’ BPE)
• Min. operating temperature (e.g. Tmin = -10ºC)
• Max. operating temperature (e.g. Tmax = 150ºC)
• Flow direction (indicated by an arrow)
•
Serial number and year of manufacturing (e.g. Reg.:17483/19)
•
CE Marking (when applicable – see section 2.2 – Certification)
• EX Marking (when applicable e.g. EX h IIB T6…T3 Gb – see section 2.2 –
Certification)
2.4. Technical data
For technical data including dimensions, materials, limiting conditions and versions refer
to the product respective Information Sheet (IS).
2.5. Factory assembly and cleaning
Assembly of the product is performed in a certified clean room according to ISO 14644-1
and all its components are cleaned and, when admissible, degreased and passivated.
Such operations are performed in accordance with certified procedures and rigorous
