background image

1.1   Introduction

The purpose of this manual is to enable the owner and operator to operate the tractor safely and

appropriately. If the instructions are followed correctly, the tractor will work for many years, following the

Valtra tradition. Configuring and adjusting the tractor in the dealership will ensure that these operating and

service instructions are properly understood.
Always consult the dealer if any part of the manual is not understood. It is extremely important that these

instructions are understood and followed.
Daily maintenance should become a routine. Always keep a record of the service hours. When ordering

new parts, use only original Valtra parts. The Valtra dealer network provides original parts and can give

instructions for installation and use. Using low quality parts can seriously damage the equipment.
We recommend that customers buy service parts from authorised Valtra dealers only.
Due to variations in operating conditions, it is impossible for the manufacturer to make comprehensive or

definitive statements in its publications with respect to the performance or usage methods of its

machines, or to be responsible for any damages or losses arising from such statements, errors or

omissions.
To prevent the warranty being invalidated, consult your Valtra dealer for special instructions if the tractor

will be used in special conditions that may be harmful (use in deep waters or in flooded fields, for

example). These products were designed for agricultural applications only (appropriate use). Any other use

shall be considered inappropriate.
Valtra is not liable for damage to property or personal injuries caused by improper use. The user must take

full responsibility for the consequences of misuse.
Conformity and full adherence to the operation, service and maintenance requirements specified by Valtra

are essential factors for appropriate use.
These tractors must be operated and maintained only by qualified personnel familiar with the features of

the tractor, in addition to the safety rules and standards (accident prevention). It is recommended that

customers contact one of the Valtra dealerships in the event of post-sale problems and for any adjustment

that may be required.

GUID-B377C7FD-E7BB-4CB2-818D-E036B1C47C72 [V2]

1. Safety

BH 4th Generation

17

ACW5554370

Find manuals at https://best-manuals.com

Summary of Contents for BH144 HiTech
































Reviews: