•
Press the QuickSteer activation button or the Auto-Guide steering valve
ON/OFF button (optional equipment) once.
The steering valve is turned OFF after which the system turns the valve back
ON. The valve is turned back on automatically only if the TwinTrac reverse
drive system is in use.
If the light is still blinking, the fault persists. In this case, contact an
authorised Valtra workshop.
3.8.23
TwinTrac reverse drive system
3.8.23.1 TwinTrac reverse drive system
TwinTrac is a driving system that allows the driver to turn the seat around and
face the reverse direction while driving with the TwinTrac driving controls. The
driving controls and functions of the TwinTrac driving system are similar to the
main driving controls. TwinTrac is optional equipment.
Turning the driver's seat to the TwinTrac position activates TwinTrac and turns
the electrohydraulic steering valve ON. You cannot turn the electrohydraulic
steering valve OFF while using TwinTrac.
Turning the driver's seat to the normal driving position deactivates TwinTrac and
turns the electrohydraulic steering valve OFF.
When the tractor is stationary, the driving position (forward or reverse) becomes
inactive in 5 seconds after the power shuttle lever has been set in position P.
Steering for TwinTrac driving is active also when the seat is turned to TwinTrac
driving even if neither of the driving positions is active. In this case, the steering
wheel brake is on moderate level, making accidental steering movements less
likely.
Steering for forward driving remains active when the driver's seat is turned to the
TwinTrac driving position.
IMPORTANT: If the TwinTrac driving steering fails while driving, use the normal
driving position steering or, if possible, turn the seat to the normal driving
position.
The brake pedal for reverse drive control also controls the trailer brakes (extra
equipment).
3.8.23.2 Activating and deactivating TwinTrac
CAUTION: Do not drive on public roads when using the reverse drive
controls.
IMPORTANT: Keep the driving speed below 25 km/h when using the reverse
drive controls.
3. Operation
- 155 -
Summary of Contents for Versu N Series
Page 1: ...OPERATOR SMANUAL NSERIES Versu Ref no 39 893 21 3 08 2015 YOUR WORKING MACHINE...
Page 2: ......
Page 517: ......
