•
Press down the switch for rear PTO and push it forward.
1
AU
TO
CONTR
OL
2
OFF
ON
OFF
1
2
1
GUID-15597209-5561-4EBD-BA5E-A13223789DB0
1. Switch for rear PTO
•
If the PTO is in use, so that the indicator light on the proline instrument
panel is lit, you can stop the PTO also by pressing the switch and pulling
it backward.
•
Turn the PTO speed control knob to the N position to disengage the PTO.
This is useful when you must stop the PTO fast, for example in an
emergency.
•
Press the rear PTO on/off push button on the rear mudguard once.
After this, the rear PTO on/off push button operates as a start button when
pressed for more than 3 seconds.
The indicator light
on the proline instrument panel blinks, indicating that the
PTO speed control knob is engaged.
3.19.2.5 Deactivating rear power take-off
WARNING: When you do not need the PTO, keep the PTO switch in
the N position.
WARNING: Use the PTO speed control knob for the actual
disengagement and engagement of the PTO. For example, when
leaving the cab, turn the knob to the N position, except when using the
PTO on/off push button on the mudguard (optional).
3. Operation
- 271 -
Summary of Contents for Versu N Series
Page 1: ...OPERATOR SMANUAL NSERIES Versu Ref no 39 893 21 3 08 2015 YOUR WORKING MACHINE...
Page 2: ......
Page 517: ......
