UNPACKING
-If you discover the nailer/stapler is damaged after you have signed for delivery, please immediately where you buy
for advice.
-Save the containers and all packing materials for possible inspection by the carrier or its agent. Otherwise, filing a
freight claim can be difficult. When you are completely satisfied with the condition of the shipment, you should
inventory the equipment.
-After you open the nailer/stapler box, you should find the following. Model SF5040E Inventory
(Figure 1)
A. 2-in-1 Nailer /Stapler............................ 1
B. Safety Goggles ................................... 1
C. Bottle for Oil......................................... 1
D. H ex Wrench 3mm............................... 1
E. H ex Wrench 4mm............................... 1
F. Carrying Case........................................1
KEY PARTS DIAGRAM
IMPORTANT INFORMATION
Compatible compressors
GUIDELINES FOR PROPER USE AND OPERATION
Be sure to use a proper air compressor with air powered tools.
General use
This nailer drives 18Ga
Brad Nails 5/8”~2” and 18Ga Crown staples 5/8”~1-5/8”, If feature a die-cast aluminum
housing and a comfortable handle for optimal control and comfort, even during extended use. It is well balanced for
stability, and ergonomically designed with a longer handle for ease of operation. It also features a hardened driver
blade for longer life, and economical air consumption with low noise. This air powered nailer is specifically designed
for professional work.
Air system
Always use clean, dry, regulated, compressed air at 4 to 7 bar (60 to 100psi).
No.
Description
No.
Description
1
Magazine
4
Trigger
2
Gun Body
5
Air inlet plug
3
Cylinder Cap
3
4
5
1
2