92
2)
As soon as you turn on power, press <RED> button on remote twice within 3 seconds. The
following screen will come out (Require
revision 2.0.6
or later firmware)
3)
There are four menus.
If you want to factory reset status, then select
“wipe data/ factory reset”.
This will help
the situation when some applications you installed cause a problem.
4)
Apply “
wipe cache partition
” first.
5)
To make the device reboot again with fresh image, put the USB flash drive on the USB port,
then select
“apply update from /usb”
. Please make sure that you have
update.zip
on the
USB drive.