2
/
24
1)
Introduction
The VALUE IP PDU offers an easy setup, as well as a user-friendly web-frontend, suitable for small and
medium businesses and their professional infrastructure. It’s designed and equipped with the latest
technology to distribute power to your connected devices and monitor them for maximum efficiency.
Product Features
Eight C13 ports with a total current of 16A
Current and voltage measurement (total input)
Built-in temperature and humidity sensor to monitor your used
infrastructure
Setting of the circuit delay time for On/Off function of each C13 port
to prevent the impact of power surge to the system
LED indicator for the power supply condition on each switch
LED digital display for the actual value of voltage and current
Built-in lightning protection circuit and resisting voltage surge circuit
for an effective and secured device protection
Equipped with Reset- and Function-Buttons in the front, as well as
a Fuse-Button on its back; the Function-Button offers four different
modes selected by different press cycles:
First long button press: The three left digits on the LED
display will show the actual temperature and the three right
digits will show humidity information in sequence.
Second long button press: The LED display will show the IP
address of the PDU.
Third long button press: The LED display will show the actual
voltage values (same as after starting the IP PDU).
Fourth long button press: after about 15 seconds, the
factory reset is activated. To complete the factory reset, you
need to disconnect the power supply from the PDU for a
moment. Attention: if you continue, your server/hardware
won’t get any power distribution, which will lead to an
outage of your system.
2)
Product Specifications
Voltage input: 110-240V 50/60Hz
Voltage output: 110-240V 50/60Hz
Input socket type: 1x IEC320 C20
Output socket type: 8x IEC320 C13
Protection: 16A overload and lightning protection
Voltage measurement range: 90-264VAC resolution 1V
