4
/
24
5)
Functions
Equipment Connection
Connect the output plugs with up to eight devices through the C13 connections of the PDU and corresponding
power cables.
Connect the input socket of the PDU (C20) and an AC power supply socket with each other through the power
cable which is included in the scope of delivery. After that, the VALUE IP PDU will start from the first port to
the 8th port with an interval of 1 second (default, changeable), and supply power for the device/s.
The LED panel will show the actual supply voltage and total output current of 8 circuits; 8 LED indicator lights
show the status of the 8 output ports.
Temperature and humidity
The display will show temperature and humidity of the PDU with the built-in temperature and humidity
sensor after pressing the Function-Button (FUNC) for about three seconds. The left screen shows
temperature and the right screen shows humidity.
IP Address
The display will show the actual IP address after pressing the Function-Button (FUNC) for the second long
time you press the FUNC button. The default IP address is 192.168.0.10.
Voltage values
The PDU will show the actual voltage values (same as after starting the IP PDU) on the LED display after the
third long button press.
Reset of the equipment
As soon as the Reset-Button (RST) on the front panel is pressed, the PDU will reset.
