88
English
“Multimedia”
“Multimedia”:
1. Press the up/down buttons to
select different files.
2. Press the OK button.
3. Use the buttons on the remote
control to play the multimedia.
Colour buttons:
1. When the picture is shown, press
the red button in zoom mode to
switch between preview and
fullscreen.
2. Press the green mode to rename
the PVR file on the PVR playback
page.
3. Press the yellow mode to delete
the PVR file on the PVR playback
page.
4. Press the blue button to enter grid
show mode.
Cleaning and maintenance
Warning!
• Before cleaning or maintenance, switch off the device,
remove the mains plug from the wall socket and wait
until the device has cooled down.
• Do not use cleaning solvents or abrasives.
• Do not clean the inside of the device.
• Do not attempt to repair the device. If the device does
not operate correctly, replace it with a new device.
• Clean the outside of the device using a soft, damp
cloth. Thoroughly dry the outside of the device with a
clean, dry cloth.
Troubleshooting
If you cannot solve the problem, contact your dealer.
Problem
Possible cause
Solution
No sound.
No or incorrect audio cable connection.
Connect the audio cable correctly.
The sound is muted.
Unmute the sound.
The device plays an incorrect sound track.
Change the sound track.
No picture.
The mains plug is not inserted into the wall socket.
Insert the mains plug into the wall socket.
The device is switched off.
Switch on the device.
The image stops or looks like mosaic.
The signal is too weak.
Strengthen the signal.
The screen shows the message “No
Signal”.
The antenna cable is not connected.
Connect the antenna cable.
Incorrect settings.
Change the settings.
The remote control does not work.
The batteries are low.
Replace the batteries.
The remote control is not pointing to the device.
Point the remote control to the device.
Make sure that nothing blocks the front panel.
