INSTRUCTIONS MANUAL
AIRBRUSH MANUAL EXTERNAL MIX EQUIPMENT
11
20. Squeeze the
gun trigger (18)
until resin begins to flow from the
TRIMIX® mixer
head (17)
and there are no air bubbles in the circuit. The residual pressure in the
resin pump (1)
will force resin to flow for a few seconds.
21. Replace the
TRIMIX® mixer head (17)
in the
gun (15)
.
The
AIRBRUSH MANUAL EXTERNAL MIX EQUIPMENT
is pressurised with material and
ready for calibration.
Recommendations.
Clean the
AIRBRUSH MANUAL EXTERNAL MIX EQUIPMENT
thoroughly after use. Proper
maintenance will extend the equipment’s useful life.
Always use the solvent recommended by the product’s manufacturer for cleaning the
equipment.
The
gun
should be left immersed in cleaning solvent when not in use. The solvent must not
touch the air valve, in order that the nozzle remains clean.
Clean the outside of the
TRIMIX® mixture head (17)
frequently when working and leave the
gun (15)
hanging vertically from the
gun hook (20)
when not in use. Avoid leaving the
gun
(15)
in a horizontal position, as this will lead to paint remains obstructing the catalyser
outlets.
Summary of Contents for AIRBRUSH MANUAL EXTERNAL MIX EQUIPMENT
