VALVER AIRBRUSH MANUAL EXTERNAL MIX EQUIPMENT, Instruction Manual

INSTRUCTIONS MANUAL 

AIRBRUSH MANUAL EXTERNAL MIX EQUIPMENT

14

12. For the calibration adjustments follow the application product manufacturer 

instructions. Repeat the calibration until getting the proportion as indicated by 

the manufacturer. Register the regulation parameters shown on the pages 14-15-

16 of this manual, paragraph 

SETTING UP EXTERNAL MANUAL MIX. 

13. Close the 

mixer air stopcock (14)

, close the

 resin pump air stopcock (3) 

and 

close the 

catalyser pump air stopcock (9)

 and recharge the deposits if 

necessary. 

14. Place the 

TRIMIX® mixer head (17) 

. 

15. Open the 

mixer air stopcock

(14)

, open the

 resin pump air stopcock (3)

 and 

open the 

catalyser pump air stopcock (9)

 and the spray pressure with the 

air 

inlet spray pressure regulator (22). 

Adjust the

spray pressure according to the 

nature of the product and user requirements with the 

air gun control (7).

16. Adjust the pressure with the 

air gun control (7)

 or with the spread regulator.

The 

AIRBRUSH MANUAL EXTERNAL MIX EQUIPMENT 

is calibrated and ready for use. 

Recommendations. 

Clean the 

AIRBRUSH MANUAL EXTERNAL MIX EQUIPMENT 

thoroughly after use. Proper 

maintenance will extend the equipment’s useful life. 

Always use the solvent recommended by the product’s manufacturer for cleaning the 

equipment. 

The 

gun

 should be left immersed in cleaning solvent when not in use. The solvent must not 

touch the air valve, in order that the nozzle remain clean. 

Clean the outside of the 

TRIMIX® mixture head (17) 

frequently when working and leave the 

gun (15) 

hanging vertically from the 

gun hook (20)

 when not in use. Avoid leaving the 

gun 

(15) 

in a horizontal position, as this will lead to paint remains obstructing the catalyser 

outlets.