22
M_2080-01_EN
6.3 Lubricants
Greasing the transmission.
Initially after 3 years, then annually.
- Remove the grease nipple cover (1 and 2).
- Fill the lubrication point (1 and 2).
- Re-attach the grease nipple cover (1 and 2).
Greasing the spindle and spindle nut.
Initially after 3 years, then annually.
- Screw out the leg as far as possible, till the red line.
- Remove the grease nipple cover (3).
- Fill the lubrication point (3).
- Wind the spindle in as far as it will go, then out and in again.
- Re-attach the grease nipple covers on both lubrication points (3).
Greasing amount:
- Lubrication point 1:
100 [g]
- Lubrication point 2:
200 [g]
- Lubrication point 3:
100 [g]
Do not open the gearbox!
