14
WSM_2051-04
1.5.2
During work
- Stay alert and watch what you are doing. Use common sense. Do not work on the product when you are
tired or have been taking alcohol, medicine or drugs. Do not smoke.
- Use a hoist when lifting 25 kg or more. Only use suitable and technically perfect lifting devices with
adequate lifting capacity built in compliance with all safety measures. Fastening of loads and instructions to
the operator of the lifting device are restricted to experienced personnel who are within sight or sound of the
operator of the lifting device.
- Only use tools, parts, materials, lubricants and service techniques that were approved by VALX. Do not use
contaminated or used lubricants. Used lubricants, cleansing agents and expended parts must be disposed of
in an environmentally safe way.
- Avoid bodily contact with lubricants.
- Never use worn tools and do not leave tools behind on the trailer axle or on the trailer.
- Never weld on any part of the trailer axle or suspension without the prior written permission of VALX.
- Never re-use self-locking fixing materials. Always replace them.
1.5.3
When work is finished
- Inspect the product. Check for damage, leakage or defects. Any part removed for maintenance or repair
purposes must be refitted and checked immediately upon completion of the work.
- Do not clear a product for operation unless it was established that it is absolutely safe and in perfect working
order.
1.6
A contribution to the protection of our environment
Please obtain information about recycling or environmentally friendly processing of parts and materials that
have been replaced during maintenance or repair tasks.
Almost all used lubricants are considered to be chemical waste. For the disposal of these a specialized company
must be contacted.
1.7
Safety instructions when working on the brake system
See chapter 7.
1.8
Safety instructions when working on the wheel hub unit
See chapter 8.
1.9
Safety instructions when working on the axle beam
See chapter 9.
Summary of Contents for WSM DRUM
