8
WSM_2051-04
Symbols
Sometimes, a picture or a pictogram tells more than text can. For that reason, the maintenance, assembly and
disassembly procedures in the chapters 5 through 9 mainly consist of graphical instructions.
In these graphical instructions the following pictograms may be used:
Tools
32
Use a spanner
The value in the left-hand corner is the width across flats.
8
Use a ring spanner
The value in the left-hand corner is the width across flats.
290 Nm
Use an appropriate torque wrench
Tighten the fastener to the torque (in Nm) given in the left-hand corner.
1 mm
Use a feeler gauge
The value in the left-hand corner is the thickness of the feeler gauge.
14
Use a hex key
The value in the left-hand corner is the hex key size.
Use a pair of circlip pliers
Use a hammer
Use an appropriate wire brush
Use a chisel
Use a crowbar
Use an inside calliper
Summary of Contents for WSM DRUM
