ELECTRIC BICYCLE METER KT
—
LCD7 Product User Manual
- 22 -
3
The meter is powered on and the power-assist ratio is at gear 3.
4
The meter is powered on and the power-assist ratio is at gear 4.
5
The meter is powered on and the power-assist ratio is at gear 5.
6&7
Retain
8
Each startup will automatically restore the gear shutdown last time.
After finishing C3 parameter setting, hold
button (
SW
) shortly to save the
current set values and enter C4 parameter setting interface.
○
C4
Throttle Function Setting
Enter C4 parameter setting interface after C3 parameter setting is finished, C4
parameter column flashes.
C4 parameter setting interface
C4 is throttle function setting, the setting range is 0-4, hold
button
(UP)
or
button (
DOWN
) for selection.
C4 parameter definition table
：
C4 value
P4=0
P4=1
0
zero startup throttle
Non-zero startup throttle
1
Zero startup, throttle speed limit is
6km/h
Before power-assist, the throttle speed limit is
6km/h, after power-assist, throttle is full speed.
2
Zero startup, throttle speed limit is
specified
Non-zero startup, throttle is specified speed limit.
3
Zero startup, Zero gear effectively
Before power-assist, the throttle speed limit is
6Km/h, after power-assist, throttle is full speed.
Stop power-assist,
return the throttle speed limit is
