Operation and configuration
2 Local panel user interface
2.2 Local panel operations
VM55.EN005
VAMP 24h support phone +358 (0)20 753 3264
11
Renaming LEDs
In VAMPSET software under the menu ”LED NAMES” it is
possible to assign custom name for each configurable LED.
2.1.5.
Adjusting display contrast
The readability of the LCD varies with the brightness and the
temperature of the environment. The contrast of the display
can be adjusted via the PC user interface, see chapter 3.
2.2.
Local panel operations
The front panel can be used to control objects, change the local/
remote status, read the measured values, set parameters, and
to configure relay functions. Some parameters, however, can
only be set by means of a PC connected to the local
communication port. Some parameters are factory-set.
2.2.1.
Navigating in menus
All the menu functions are based on the main menu/submenu
structure:
1.
Use the arrow keys UP and DOWN to move up and down in
the main menu.
2.
To move to a submenu, repeatedly push the RIGHT key
until the required submenu is shown. Correspondingly,
push the LEFT key to return to the main menu.
3.
Push the ENTER key to confirm the selected submenu. If
there are more than six items in the selected submenu, a
black line appears to the right side of the display (Figure
2.2.1-1). It is then possible to scroll down in the submenu.
Figure 2.2.1-1 Example of scroll indication
4.
Push the CANCEL key to cancel a selection.
5.
Hold the CANCEL key pushed for appr. 4 sec. to display the
title screen.
6.
Pushing the UP or DOWN key in any position of a
submenu, when it is not selected, brings you directly one
step up or down in the main menu.
