background image

 

 

 

 
 
 

 

van Aaken SmartBox

 C3.2 

 

Chrysler Dodge RAM installation instructions 

 

 

van Aaken Developments USA LLC 

4990 Valenty Rd., Suite C 

Chubbuck, ID 83202 

Phone: (208) 234-5660 Fax: (208) 637-0287 

Website: www.vanaaken.com Email: usa@vanaaken.com

 

 

 
 

Warranty Statement 

 

van Aaken Developments Ltd

 

12 Month Warranty Statement

 

 

van Aaken Developments Ltd (vAD) warrants to the original purchaser that any parts purchased shall 
be free from defects in material and workmanship.  A defect is defined as a condition that would 
render the product inoperable.  This warranty does not cover deterioration of plating, paint or any 
other coating.  vAD liability is limited to the repair or replacement, at vAD's option, of any warrantable 
product returned prepaid with a complete service history and proof of purchase to the factory.  A valid 
proof of purchase is a dated bill of sale.  Repaired or replaced product will be returned to the 
customer freight collect.  Accepted warranty units which have been replaced become the sole 
property of vAD. 

 

Product returned for warranty determination must be accompanied by a complete service 
history, including details of the circumstances under which the defect occurred, and a Return 
Material Authorization (RMA) number obtained in advance from a vAD customer services 
representative.  vAD will be the final authority on all warranty decisions. 

 

This warranty shall not apply to any unit which has been improperly stored or installed; subjected to 
misapplication, improper operating conditions, accidents, or neglect; or which has been improperly 
repaired or altered or otherwise mistreated by the owner or his agent. 

 

This warranty shall terminate at the end of 12 months in service with the original user.  Labor 
cost incurred by the removal and replacement of a vAD product, while performing warranty 
work, will be the responsibility of the vehicle owner, in no case does the obligation of van 
Aaken Developments Ltd exceed the original purchase price of the product as indicated on 
the original bill of sale. 

 

Except as set forth in this warranty, vAD disclaims any implied warranty, including implied warranties 
of merchantability and fitness for a particular purpose.  

vAD also disclaims any liability for 

incidental or consequential damages including but not limited to, repair labor, rental vehicles, 
hotel costs or any other inconvenience costs.

  This warranty is in view of all warranties or 

guarantees, either expressed or implied and shall not extend to any customer or to any person other 
than the original purchaser residing within the boundaries of the continental U.S or Canada. 

Summary of Contents for SmartBox C3.2







Reviews: