Van Der Stahl V-460 Series Operating Instructions Manual Download

Page: 4 / 76

V-460/610 Series Operating Instructions Ver.2.04E

1  Package contents  …………………………………………………………………………………… 6
2  Warning-caution label location and content  …………………………………………………… 7
3  Operating precautions  ……………………………………………………………………………… 9

For safety operating ……………………………………………………………………………………………………………………… 9
For smooth operation …………………………………………………………………………………………………………………… 11
Other safeguards ………………………………………………………………………………………………………………………… 12
About the I-heating element …………………………………………………………………………………………………………… 13

4  Outline of structure  ……………………………………………………………………………… 14
5  Proper operating boundaries for the V-460/610 series ……………………………………… 14
6  Major parts and function  ………………………………………………………………………… 15
7  Proper use of the sealer  ………………………………………………………………………… 17

7-1  Secure the work place …………………………………………………………………………………………………………… 17
7-2  Plugging in the electrical power cord …………………………………………………………………………………………… 17
7-3  Set an air pedal …………………………………………………………………………………………………………………… 18
7-4  Attach/remove the table and how to adjust its height and angle  …………………………………………………………… 18
7-5  Nozzle position adjustment ……………………………………………………………………………………………………… 19
7-6  Test emergency stop system  …………………………………………………………………………………………………… 20
7-7  Turn ON the circuit breaker and power switch ………………………………………………………………………………… 20
7-8  Set the seal conditions with the control unit …………………………………………………………………………………… 21
7-9  Test sealing  ……………………………………………………………………………………………………………………… 21
7-10  Finish sealing ……………………………………………………………………………………………………………………… 21
7-11  Turn OFF the circuit breaker and power switch  ……………………………………………………………………………… 21
7-12  Inspection after operation  ……………………………………………………………………………………………………… 21

8 Control unit setting and operating procedures ……………………………………………… 22

8-1 Operate the machine with pre-installed operation patterns ………………………………………………………………… 23

8-1-1 Sample operating procedures : “seal only” operation ………………………………………………………………… 24
8-1-2 Sample operating procedures : “manual sealing” operation ……………………………………………… 25

8-2 Register sample operation patterns …………………………………………………………………………………………… 27

8-2-1 Sample case: register a “seal only” operation mode ………………………………………………………………… 28
8-2-2 Sample case: register a “timer seal” operation mode …………………………………………………… 29

8-3 Explanation of terms ……………………………………………………………………………………………………………… 30
8-4 How to set the control unit ……………………………………………………………………………………………………… 31

8-4-1 Seal counter …………………………………………………………………………………………………………………… 32
8-4-2 Select the desired operation number  ……………………………………………………………………………………… 32
8-4-3 Register/change an operation pattern ……………………………………………………………………………………… 32
8-4-4 Delete a registered operation pattern  ……………………………………………………………………………………… 33
8-4-5 Set heating temperature ……………………………………………………………………………………………………… 34
8-4-6 Set heating time  ……………………………………………………………………………………………………………… 35
8-4-7 Set cooling temperature  ……………………………………………………………………………………………………… 36
8-4-8 Select the desired vacuuming mode  ……………………………………………………………………………………… 37
8-4-9 Manual vacuum mode ………………………………………………………………………………………………………… 37
8-4-10 Timer vacuuming mode ……………………………………………………………………………………………………… 38
8-4-11 Vacuum gauge vacuuming mode …………………………………………………………………………………………… 38
8-4-12 Setting nozzle stroke ………………………………………………………………………………………………………… 39
8-4-13 Maintenance mode …………………………………………………………………………………………………………… 39

Table of Contents