© March 2018 Van Essen Instruments. All rights reserved
.
www.vanessen.com
3
1.3
System Overview
The two configurations for the Smart Interface Cable are shown in in Figure 3. On the left, the Smart
Interface Cable is connected to a computer and a DXT-Cable (part no AS2xxx). On the right the Smart
Interface Cable is connected to a DDC cable(part no AS6xxx) through the DDC-DXT Adapter (part no
AS348).
Figure 3
Smart Interface Cable connected to (left) a DXT-cable and (right) a Diver Data Cable through the DDC-DXT
Adapter (AS348).
2
Getting Started
2.1
Supported Equipment
The following Divers can be used in combination with the Smart Interface Cable:
•
TD and Baro-Diver (model DI8xx),
•
Mini and Baro-Diver (model DI5xx),
•
Micro-Diver (model DI6xx),
•
Cera-Diver (model DI7xx),
•
CTD-Diver (model DI27x), and
•
MTD-Diver (model DI24x)
The following cables can be used in combination with the Smart Interface Cable:
•
DXT-Cable (AS2xxx)
•
DDC cable (AS6xxx); DDC-DXT Adapter required
See appendix B for more details of these products.
