vM MP470 MEDIA PLAYER
7
Controls
Precautions
Connections
Maintenance and advice
Technical Specifications
Please read after this start up manual, also the extended user manual which you can find on the
desktop. Here you can read all other info and tips to use hard- and software with maximal results
and quality.
The digital outputs are clocked for the different digital inputs.
By switching over between outputs, a synchronicity moment can occur.
We strongly advise to restart the MP470 for best performance/results after switching.
All DVD and Blu-ray disks can be played when they are produced with the appropriate format /
protocols.
All audio CD’s, CD-R’s and CD-RW’s can be played when they are produced following the Red
Book protocol.
For your convenience you will find a red sticker, indicating the mains
“phase”. The phase of your
electricity system can be determined with a mains voltage seeker.
Clean the player only with a cloth, impregnated with a Ph-neutral cleaning fluid. And it must be
mildly moist! NEVER use strong fluids and/or erasers. Before cleaning ALWAYS remove the power
cord from its wall socket, by its plug not by its cord.
The optimum operating temperature is reached after approx. 60 minutes of continuous play. Then it
will be possible to start enjoying the superb van Medevoort audio and video qualities of this media
player.
Only to protect against over-temperature (above 60 degrees Celsius), this player is equipped with
an active cooling system. Within normal use, all cooling (CPU and PSU) is passive.
Therefore, place the player on a location with enough free space above and rear for ventilation to
regulate / reduce temperature. If the temperature exceeds 70 degrees Celsius, the safety
protection is switched on, the system is switched off and the top LED (2) is blinking.
We strongly recommend that you use high quality interconnect cables and power cord. E.g. the
audiophile van Medevoort Silver Cable.
For other questions, please contact your local dealer.
