SECTION 5: MAINTENANCE
RELIANT RS45 AIR COMPRESSOR
PAGE - 24
090126-OP_r0 (JAN-2018)
VANAIR MANUFACTURING, INC.
(844) VAN-SERV • www.vanair.com
5.2 MACHINE MAINTENANCE
SCHEDULE
Refer to
Table 5A: Routine Maintenance
Schedule
. A routine maintenance schedule
based on time and/or hours logged, is given
in
Table 5A
. The intervals are determined
from machine usage under typical operation
conditions. However, the operator must be
aware that operating conditions will vary
depending on such things as specific
customer
requirements,
environmental
temperatures and cleanliness of the ambient
air. With this in mind, the specifications given
in
Table 5A
should be used as a guideline
instead of a fixed agenda. A safe approach
to routine maintenance would be to perform
the given maintenance task more frequently
under harsher conditions.
Vanair provides a routine maintenance parts
list in
Section 7
,
Table 7A
. Should a non-
routine part need replacement or servicing,
peruse the various parts list illustrations in
Section 7
to help determine the exact part
and part number in question. Our parts and
service departments are ready to assist in
identifying and/or replacing non-routine
parts.
For
assistance
in
obtaining
routine
maintenance or replacement parts, consult
Section 7.1, Parts Ordering Procedure
,
and
Table 7A: Recommended Spare Parts
List.
5.3 REPLACEMENT PARTS
Replacement parts should be purchased
through your local Vanair
®
representative or
where
the
compressor
system
was
purchased. If, for any reason, parts are not
available in this manner, they can be
purchased through Vanair directly.
VANAIR MANUFACTURING, INC.
10896 West 300 North
Michigan City, IN 46360
(800) 526-8817
(219) 879-5100
Service (toll free): (844) VAN-SERV
(844) 826-7378
Service Fax: (219) 879-5335
Parts Fax: (219) 879-5340
Sales Fax: (219) 879-5800
www.vanair.com
IMPORTANT
DO NOT mix oils of different types. Use only
original Vanair
®
equipment filters. Mixing of
different types of oils, or using non-Vanair
equipment filters will VOID THE WARRANTY.
NOTE
For assistance when ordering new
replacement parts, consult
Section 7.1,
Parts Ordering Procedure
, and Table 7A:
Recommended Spare Parts List.
NOTE
If additional spare parts are being stored for
future use, make certain that they are
stored in proper containers that allow for
protection against contamination, and kept
in a clean area of moderate temperature
reading. For information on storing the
machine package for periods of non-use,
consult
Section 5.4.8.2, Long Term Storage
.
Summary of Contents for Reliant RS45
Page 86: ...BLANK PAGE...
Page 87: ...BLANK PAGE...