SECTION 3: INSTALLATION
VIPER DIESEL
PAGE - 8
090058-OP_r0 (AUGUST-2014)
VANAIR MANUFACTURING, INC.
(800) 526-8817 • www.vanair.com
3.3 INSTRUMENT PANEL
RELOCATION
The Viper Diesel compressor allows for the
instrument panel to be remote mounted if it
better-suits the vehicle’s mounting allowance
space or the compressor’s functions. The
optional extension harness must be used for
remote panel installation (see
Table 7B
).
Please note that if relocating the panel, you
should re-apply any zip ties that were cut to
re-establish the cable wire to the new
location. Tying the wire at intervals may be
needed to secure the panel cable away from
moving objects or sharp edges during
operation.
Figure 3-1: Dimension Diagram - Part 1 of 2
NOTE
The dimensions listed in this diagram are
the
minimum
required clearance
distances needed for properly cooling the
machine. Additional clearance room may
be desired for easier access for control
and/or maintenance functions.
050848_r1_1of2
DISCLAIMER
If machine package is to be mounted
within a confined space such as beneath a
canopy, the unit must have a minimum of
eight (8) inch clearances on the front and
back sides for ventilation.
