VIPER DIESEL
SECTION 7: ILLUSTRATED PARTS LIST
090058-OP_r0 (AUGUST-2014)
PAGE - 33
VANAIR MANUFACTURING, INC.
(800) 526-8817 • www.vanair.com
Figure 7-1: Machine Package Serial Number Plate Location
NOTE
Machine serial number also displays on
instrument panel at start-up, on the hours
screen.
7.1 PARTS ORDERING PROCEDURE
Part orders should be placed through the distributor from
whom the unit was purchased. If for any reason parts
cannot be obtained in this manner, contact the factory
directly at the address or phone numbers below.
When ordering parts always indicate the
Serial Number
of the machine package. This can be obtained form the
Bill of Lading for the machine package, or from the
compressor unit serial number plate. See
Figure 7-1
for
location of machine package serial plate. Consult
Table
7A: Recommended Spare Parts List
on the next page
for a listing of replacement parts.
SECTION 7:
ILLUSTRATED PARTS LIST
VANAIR MANUFACTURING, INC.
10896 West 300 North
Michigan City, IN 46360
Telephone: (800) 526-8817
(219) 879-5100
Service Fax: (219) 879-5335
Parts Fax: (219) 879-5340
Sales Fax: (219) 879-5800
www.vanair.com
