background image

English

The Vanturns

 are used indoors for shorter transfers between wheelchair and bed, wheelchair and toilet/portable toilet/

wheelchair or chair/armchair. 

Vanturns 

can also be used to aid repositioning farther back in the chair. 

The Vanturn is

 

designed for easy manoeuvring and use in confined spaces. They are easy to assemble and disassemble in just two 
sections for easier transport and storage. 

Visual inspection

Check the condition and function of the assistive  
device regularly. Always inspect the product after  
laundering. Check to ensure that seams and material 
are free from damage. Check to ensure that fabric 
is not worn or faded. If there are signs of wear, the 
product must be discarded.

Always read the user manuals for all assistive devices used 
during a transfer. Keep the user manual where it is accessible 
to users of the product. Always make sure that you have the 
right version of the user manual. The most recent editions of 
user manuals are available for downloading from our 
website, www.

vancare

.com.

Check Safety

Always read the user manual

A. Push the rising ladder/
tube down into the mount-
ing fixtures on the chassis, 
so that the height-adjust-
ment buttons are facing 
towards the caregiver.

B. Insert the fixture knobs 
and tighten. Check to 
ensure that the fixture 
knobs are securely tight-
ened before using the 

Vanturn

.

Assembly

• 

Vanturn 

is intended for shorter transfers.

• 

Vanturn

 can only be used on flat floor.

• The caregiver must always apply counter pressure in a safe
way when the user is standing up, sitting down and during the 
actual transfer.

Special requirements and conditions

Transport

The chassis and raising 
ladder can be carried 
separately. Carry the 
chassis by holding the 
tube on the front end of 
the product. 
Transport, e.g., by car, 
and storage are easy, 
since the 

Vanturn

 can 

be disassembled in two 
pieces.

Note! 

Always perform a risk assessment before using 

Vanturn

.

 

To transfer with 

Vanturn

, the user must be able to:

• support weight while standing 
• stand up and maintain balance (with support) 
• grasp handles
• understand instructions

A

B

Vanturn

Summary of Contents for Vanturn






Reviews: