Product Summarize | VANCH-VH production information
Page 8 of 16
2
User in structions
VANCH-VH button design completely follows the operating principle of the
mobile phone keys, and the user can quickly get started with the device with a
short time. Common operations are as follows:
Function
Operations
Power on/off
Long press
”
power
”
button with 2 seconds,
it can power on/off the device, if long
press with 5 seconds can Forced
shutdown the device under unusual
situation.
Menu switch
Click
”
UP
””
Down
”
could do the menu
switch, long press them more than 1
second could menu switch quickly, click
“
OK
”
could enter/quit from the Sub-menu.
Select work module
Move to
”
menu switch
”
, click
”
ok
”
to enter
the sub-menu, you could select use
”
RFID
module
”
or
“
barcode module
”
.
“
RFID
module
”
use to rfid tag detect,
“
Barcode
module
”
use to barcode scan( if the device
is without barcode, then this function is not
workable)
RFID power adjust
Move to
”
set RF power output
”
menu,
click
”
ok
”
to enter the sub-menu, press
”
up
”
and
“
down
”
button to set the RF power
output, then click
”
OK
”
to confirm.
