background image

www.vanco1.com

800.626.6445

4

SPECIFICATIONS

Interface  .................................................................. Transmitter: HDMI input, IR output (3.5mm), IR 
input (3.5mm),RJ45 Ethernet interface, 5V DC in, Toslink port, 1 audio output config switch.  Receiver: HDMI 
output, IR output (3.5mm), IR input (3.5mm),RJ45 Ethernet interface, 5V DC in 
Dimension  ................................................................ (L x W x H): 78.4 x 67 x 19 mm 
Net weight  ............................................................... 0.2kg per unit 
Video bandwidth  ....................................................... Maximum TMDS clock frequency 165MHz 4.95Gbps 
Resolution and distance  ............................................. 1080P      170ft (50 meters)-CAT5e/ 270ft (80 
meters)-CAT6 
720P/1080i  270ft (80 meters)-CAT5e/ 330ft (100 meters)-CAT6 
Audio formats  .......................................................... 8-channel, support Dolby True HD and DTS Master 
TMDS input signal  ..................................................... 1.2 volts (point to point) 
DDC input signal  ....................................................... 5 volts (point to point) 
Indicator  .................................................................. Power-Green, video link-Yellow 
HDMI interface standard  ........................................... HDMI 1.3 standard (HDMI 1.4 3D function), HDCP 
2.0, support CEC, EDID 
Remote IR  ................................................................ 20-60 KHz wide frequency carrier 
ESD level  ................................................................. HBM ±4 kV (Contact Discharge)
Temperature range  ................................................... 0 ~ 40°C (operation), -20~60°C(stock) 
Compliance  .............................................................. FCC; CE; RoHS 

PACKAGE CONTENTS

• 

 

EVEX2007 (TX & RX) 

• 

 

(2) IR Blasters (TX) 

• 

 

(2) IR Receivers (RX) 

• 

 

(2) DC 5V in line power supply

• 

 

Product Manual 

Summary of Contents for Evolution EVEX2007













Reviews: