background image

www.vanco1.com

800.626.6445

4

SPECIFICATIONS

Transmitter Input ....................................................... HDMI IN
Transmitter Output .................................................... HDBaseT OUT
Receiver Input ........................................................... HDBaseT IN
Receiver Output ......................................................... HDMI OUT
Transmitter Control Ports ........................................... IR IN, IR OUT, RS-232
Receiver Control Ports ............................................... IR IN, IR OUT, RS-232
Transmission Mode & Distance  ................................... HDBaseT; 1080P ≤ 70m; 4K×2K w/HDR ≤ 50m*
Resolution ................................................................. Up to 4K×2K@60Hz 4:4:4 with HDR
Bandwidth ................................................................. 18Gbps
HDMI Standard .......................................................... HDMI 2.0 & HDCP 2.2
Power Consumption  .................................................. 20W (max)
Temperature.............................................................. -10°C ~ 50°C 
Humidity ................................................................... 0% ~ 90% 
Power Supply ............................................................ Input: 100VAC~240VAC, 50/60Hz; Output: 24VDC 
1.25A
Dimensions (mm) ....................................................... 146.2mm W x 94mm H x 17.9mm D

                *

PACKAGE CONTENTS

• 

EVEX4K50 (TX & RX)

• 

IR Transmitter (IR TX)

• 

IR Receiver (IR RX)

• 

(2) RS232 Cables (3-pin to DB9)

• 

Mounting Hardware

• 

(1) DC 12V Power Supply

• 

Product Manual

Cable Type

Range

Supported Video

CAT5e/Cat6

75 meters

Most common full HD formats:

• 

Up to 1080p@60Hz 36bpp

• 

Data rates lower than 5.3Gbps or below 
225MHz TMDS clock

CAT5e

50 meters

Ultra Full 4K video formats:
2160@60Hz ((Ycbcr 4:4:4) 24bit)

CAT6a/CAT7

60 meters

Ultra Full 4K video formats:
2160p@60Hz ((Ycbcr 4:4:4) 24bit)

Summary of Contents for Evolution EVEX4K50













Reviews: