background image

www.vanco1.com

800.626.6445

2

1.  Do not expose this unit to water, 

moisture, or excessive humidity.

2.  Do not install or place this unit in 

a built-in cabinet, or other confined 

space without adequate ventilation.

3.  To prevent risk of electrical shock or 

fire hazard, due to overheating do not 

obstruct unit’s ventilation openings.

4.  Do not install near any source of 

heat, including other units that may 

produce heat.

5. 

Do not place unit near flames.

6.  Only clean unit with a dry cloth.
7. 

Unplug unit during lightening storms 

or when not used for an extended 

period of time. A surge protector is 

strongly recommended.

8. 

Protect the power cord from being 

walked on or pinched, particularly at 

the plugs.

9.  Use unit only with accessories 

specified by the manufacturer.

10. 

Refer all servicing to qualified 

personnel.

CAUTION

HDMI is a very complex technology requiring continuous authentication of the signal 

and the same video resolution and audio settings on all electronic equipment in the 

system. When there are multiple sources and displays, the video resolution and 

audio setting on all connected units must be adjusted to correspond with that of the 

display having the lowest video and audio capability.

WARNING

DEAR CUSTOMER 

Thank you for purchasing this product. 

 

For optimum performance and safety, please  

read these instructions carefully before connecting, 

operating or adjusting this product. Please keep this 

manual for future reference.

This product is 100% inspected and tested in the United 

States to verify HDMI performance parameters.

Summary of Contents for Evolution EVRC5002













Reviews: