www.vanco1.com
800.626.6445
6
CONNECT AND OPERATE
1.
Connect a source such as a Blu-Ray Player, game console, A/V Receiver, Cable or
Satellite Receiver, etc. to the HDMI input on the unit.
2.
Connect a display such as an HDTV or HD Projector to the HDMI output on the unit.
3.
For power, plug in the unit with the included power supply.
EDID OPERATION
(1) READ THE EDID FROM AN HDMI DISPLAY MANUALLY
1. Connect the display device to the EDID Reader/Writer/Re-timer via Monitor-HDMI port.
2.
Plug in the 5V DC power supply unit.
3. Set EVRC5002 to the mode 6.
4.
The EDID reading sequence is done when the green LED light turns off.
5. Switch the rotary switch back to mode 0 ~ 4.
(2) READ THE EDID FROM AN HDMI DISPLAY VIA SOFTWARE
1. Set EVRC5002 to the mode 7.
2. Connect the display device to the EDID Reader/Writer/Re-timer via Monitor-HDMI port.
3.
Plug in the 5V DC power supply unit.
4. Connect the EVRC5002 to the serial port of PC.
5. Click on “HDMI Monitor Reader” button to read the EDID information from HDMI display.
6.
The EDID reading sequence is done when the green LED light turns off.
(3) WRITE EDID TO THE HDMI DISPLAY
1. Set EVRC5002 to the mode 7.
2. Connect the display device to the EDID Reader/Writer/Re-timer via Monitor-HDMI port.
3.
Plug in the 5V DC power supply unit.
4. Connect the EVRC5002 to the serial port of PC.
5. Click on “HDMI Monitor Writer” button to write the EDID information to HDMI display.
6.
The EDID reading sequence is done when the green LED light turns off.
*The EDID Reader/Writer/Re-timer may not work on the monitors with EDID
write-protection.
