www.vanco1.com
800.626.6445
8
TROUBLE-SHOOTING
1. PROBLEM 1: Color loss or no video signal output in HDMI display CAUSE: The connecting cables may
not be connected correctly. SOLUTION: Check whether the cables are connected correctly and in working
condition.
2. PROBLEM 2: Color loss or no video signal output in HDMI display CAUSE: The display is not compatible
with the present output resolution. SOLUTION: Make sure the resolution of the display(s) is compatible
with the present resolution.
3. PROBLEM 3: No HDMI signal output in EVSLIM14 while local HDMI input is in normal working state
CAUSE: The connecting cables may not be connected correctly. SOLUTION: Check whether the cables are
connected correctly and in working condition.
4. PROBLEM 4: Splash screen in output devices CAUSE: Poor quality of the connecting cable SOLUTION:
Change for another cable of good quality.
5. PROBLEM 5: Static becomes stronger when connecting the video connectors. CAUSE: Bad grounding
SOLUTION: Check the grounding and make sure it is connected well.
SAFETY AND NOTICE
This splitter has been tested for conformance to safety regulations and requirements, and has been certified
for international use. However, like all electronic equipment, this splitter should be used with care. Please read
and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to
the unit.
•
Follow all instructions and warnings marked on this unit.
•
Do not attempt to service this unit yourself, except where explained in this manual.
•
Provide proper ventilation and air circulation and do not use near water.
•
Keep objects that might damage the device and assure that the placement of this unit is on a stable
surface.
•
Use only the power adapter and power cords and connection cables designed for this unit.
•
Do not use liquid or aerosol cleaners to clean this unit.
•
Always unplug the power to the device before cleaning.
