General
11
Vanderbilt International (IRL) Ltd.
05.2016
4.4.4
Unlocking a Door
In order to unlock the door a user is required to present his card to the ARS6311-
RX. Whenever this happens the reader activates its LED SYSTEM
(orange) for
a moment and generates a short confirmation beep. After successful identification
the reader energizes the door lock for the predefined time (please refer to chapter
6.4.1. User Programming Commands,
Door Lock Triggering Time
). The lock acti-
vation is signaled on LED OPEN
(green), which remains on for as long as the
door lock is energized. When access to the supervised room is denied the reader
generates a long beep. The access to a room can be rejected in the following situ-
ations:
–
When the presented card is not valid (unknown).
–
When the presented card belongs to a Toggle LTD User.
–
When the reader operates in ARMED Mode and the
Access Disabled When
Reader Armed
option is active.
In the last case the Toggle or Toggle LTD User can read its card in order to switch
the reader from ARMED to DISARMED Mode, thus re-enabling the reader to grant
access to other users.
